ASUS mypal a600 User Manual
Avolites Pearl 2000 Operators Manual - page
36
P2000MAN.DOC 19/10/99 17:59
•
Press the PATCH button on the blue Program Select bank.
Puts you in the
PATCH DIMMER OR DEVICE menu.
The VGA Screen will automatically change to show which DMX addresses are in
use.
•
Press Softbutton C [SWAP PAN AND TILT].
The VGA Screen will automatically show you all 30 Handles for the current Page of
Fixtures and Attribute Bank.
Fixtures and Attribute Bank.
•
Select the Pan /Tilt Attribute Bank so that you can see what you are
doing.
Its LED lights up. .
•
Press the Preset SWOP buttons of the Handle of each Fixture you wish
to change to toggle the mode.
You can change Pages of Fixtures if necessary.
The swapped Channels are displayed on the VGA monitor as SWAPPED.
⇒
Set up any Pan and Tilt Swaps before you start programming otherwise
your looks will not replay in the way you expect.
4.7 The Moving Light Menu
The Moving Light menu contains options to make programming Intelligent
Fixtures on the Pearl very easy. It is accessed by pressing Softbutton H [ML
Menu].
Fixtures on the Pearl very easy. It is accessed by pressing Softbutton H [ML
Menu].
It looks like this :
Softbutton A LOCATE FIXTURE
Softbutton B ALIGN FIXTURE
Softbutton C (Not used)
Softbutton D RECORD GROUP
Softbutton E DEFINE THE STAGE
Softbutton F TRACKING OFF (on)
Softbutton G Macro
Softbutton B ALIGN FIXTURE
Softbutton C (Not used)
Softbutton D RECORD GROUP
Softbutton E DEFINE THE STAGE
Softbutton F TRACKING OFF (on)
Softbutton G Macro
Each function is accessed by pressing the appropriate Softbutton.
4.7.1 LOCATE FIXTURE
Locate Fixture puts the unit to Open White, no gobos or effects and with
the Pan and Tilt both at 50% to help you find it.
the Pan and Tilt both at 50% to help you find it.
4.7.2 Align Fixtures
This copies ALL the Attributes from the first selected Fixture to all the other
selected Fixtures.
selected Fixtures.
•
Press Softbutton F [PATCH UTILITIES].
Puts you in PATCH UTILITIES menu.
•
Press EXIT twice to leave the function.
Puts you back in LIVE PROGRAM
MODE menu.
•
Turn the Key to Program.
Puts you in Live Program Mode menu.
•
Press Softbutton H [ML MENU].
Puts you in the Moving Light menu.
•
Select the Fixtures to be Located.
Their LED’s will light up.
•
Press Softbutton A [LOCATE FIXTURE].