ASUS mypal a600 User Manual
Avolites Pearl 2000 Operators Manual - page
48
P2000MAN.DOC 19/10/99 17:59
•
Either type in another DMX address to clear or press EXIT to quit.
Puts
you back in the PATCH menu.
⇒
Use this feature with care, as it is possible to delete one or more of the
Attributes of an Intelligent Fixture, which otherwise remains patched.
5.15 Deleting a Handle
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
•
Press the PATCH button on the blue Program Select bank
. Puts you in the
PATCH DIMMER OR DEVICE menu.
•
Press the DELETE button on the blue Program Select bank.
Its LED
flashes.
•
Press the ADD or SWOP button of the Handle you want to clear.
•
Press ENTER.
•
Either press another ADD or SWOP button to clear another Handle or
press EXIT to quit.
Puts you back in the PATCH menu.
⇒
Deleting a Handle loses all the Programming associated with it. You
should therefore use this function with care!
5.16 Deleting an entire patch
Since deleting all the handles loses all the data programmed with them
anyway, the best way to do this is to do a WIPEALL. See 1.7.1 To do a
WIPEALL.
anyway, the best way to do this is to do a WIPEALL. See 1.7.1 To do a
WIPEALL.
5.17 Illegal Addresses
Some Fixtures can only be addressed at certain DMX addresses.
You should check this out before patching by reading the Operators Manual
for the Fixture, looking on the back of the Fixture for specific information or
asking the manufacturer or dealer for that particular Fixture. See Appendix 4.
Intelligent Fixture Manufacturers for contact numbers.
for the Fixture, looking on the back of the Fixture for specific information or
asking the manufacturer or dealer for that particular Fixture. See Appendix 4.
Intelligent Fixture Manufacturers for contact numbers.
Subject to this information being available to Avolites and in the Personality
File, the desk will not allow you to patch at an illegal address, by giving the
message ILLEGAL ADDRESS, you must now enter another DMX address.
File, the desk will not allow you to patch at an illegal address, by giving the
message ILLEGAL ADDRESS, you must now enter another DMX address.
5.18 Setting a patch level
Before patching a Dimmer you can optionally set the patch level.
Once you are in the Dimmer patch menu :
•
Press Softbutton A [LEVEL = X%].
You are asked for a percentage level for that
DMX Channel.
•
Type in a percentage level and press ENTER.
That DMX Channel and all subsequent Channels will be limited to the level
entered until you change it again. The default is 100%.
entered until you change it again. The default is 100%.