ASUS mypal a600 User Manual
Avolites Pearl 2000 Operators Manual - page
51
P2000MAN.DOC 19/10/99 17:59
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
•
Press the blue PATCH button on the Program Select bank.
Puts you in the
PATCH DIMMER OR DEVICE menu.
•
Press Softbutton F [PATCH UTILITIES].
Puts you in the PATCH UTILITIES
menu.
•
Press Softbutton D [SET DMX LINES].
Puts you in the SET DMX LINES menu.
•
Use the Up and Down Arrow keys to put the yellow flashing cursor on
the ‘MAX DMX CHANNELS PER LINE’ value (Default is 512).
•
Enter the new value of the highest DMX Channel that you are going to
use. This must be between 48 and 512.
•
Press ENTER to confirm the new value. The menu will exit.
Puts you in the
Patch Utilities menu.
•
Press EXIT to quit the Patch Utilities menu.
Or :
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
•
Press Softbutton B [USER SETTINGS].
Puts you in the USER SETTINGS
menu.
•
Use the Up and Down Cursor Keys to move down to access item 18
[DMX chans = XXX]. (Default is 512).
•
Use the Left and Right Cursor Keys to scroll through DMX values from
48 to 512.
•
Press Softbutton F [QUIT] to exit.
Puts you back in LIVE PROGRAM MODE
menu.
5.22 Finding ‘lost’ Fixtures
Sometimes there may be an occasion where a Fixture has been rigged with
an unknown DMX start address. It is possible to scroll through a series of
DMX addresses and search for the start address of the ‘lost’ Fixture. When
you find it, the Fixture will go to its Locate Fixture state. (See section 3.5
Using LOCATE FIXTURE).
an unknown DMX start address. It is possible to scroll through a series of
DMX addresses and search for the start address of the ‘lost’ Fixture. When
you find it, the Fixture will go to its Locate Fixture state. (See section 3.5
Using LOCATE FIXTURE).
To find your ‘lost’ Fixture :
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
•
Press the blue PATCH button on the Program Select bank.
Puts you in the
PATCH DIMMER OR DEVICE menu.
•
Press Softbutton F [PATCH UTILITIES].
Puts you in the PATCH UTILITIES
menu.
•
Press Softbutton E [FIND FIXTURE].
Puts you in the FIND FIXTURE menu.
•
The VGA Screen displays all the currently patched Fixture types. Use the
Up and Down Cursor Keys to select the type of Fixture that you are
looking for.
looking for.
•
Press ENTER.
Puts you into Search mode.
•
Press EXIT or the PATCH button to leave the Patch functions.
Puts you
back in LIVE PROGRAM MODE menu.