ASUS p65up8 User Manual

III. INSTALLATION

DRAM Memory Installation Procedures

1. The SIMM memory modules will only fit in one orientation as shown because

of a “Plastic Safety Tab” on one end of the SIMM slots which requires the
“Notched End” of the SIMM memory modules.

R

5 6 7 8

1 2 3 4

2 1

Notched End

i960
Memory

System Memory

2. Press the memory module firmly into place starting from a 45 degree angle

making sure that all the contacts are aligned with the slot.

3. With your finger tips, rock the memory module into a vertical position so that it

clicks into place.

Clip

Plastic Safety Tab (This Side Only)

Mounting Hole

72 Pin DRAM in SIMM Socket

4. The plastic guides should go through the two mounting holes on the sides and

the clips should snap on the other side.

5. To release the memory module, squeeze both clips outward and rock the module

out of the clips.

(DRAM Memory)