APart H10-G Leaflet
TECHNICAL SPECIFICATIONS
APart H10-G
HORN LOUDSPEAKER
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
The H10-G is a powerful weatherproof industrial horn loudspeaker with
compression driver. It offers a high sound pressure, which makes this loudspeaker
ideally suited for speech and the reproduction of alarm signals. The H10-G is
suited for both indoor and outdoor use.
compression driver. It offers a high sound pressure, which makes this loudspeaker
ideally suited for speech and the reproduction of alarm signals. The H10-G is
suited for both indoor and outdoor use.
Thanks to its stainless steel bracket, the H10-G will remain truly rust free. The
bracket also makes it possible to rotate the speaker over a range of more than 180
degrees. Because this horn speaker is constructed in high impact ABS, it is able to
withstand even the harshest of elements.
bracket also makes it possible to rotate the speaker over a range of more than 180
degrees. Because this horn speaker is constructed in high impact ABS, it is able to
withstand even the harshest of elements.
The loudspeaker is equipped with a high quality 100-volt transformer with several
power taps, and can also be used in 8-ohm systems. The APart technology avoids
any overload of your amplifier by controlling the impedance with the unique IMC
protection device inside.
power taps, and can also be used in 8-ohm systems. The APart technology avoids
any overload of your amplifier by controlling the impedance with the unique IMC
protection device inside.
Type :
Compression driver horn speaker
Material :
high impact ABS
Standard colour :
grey
Rated power RMS :
10 W / 100 volt
Music power RMS :
15 W / 100 volt
Transformer power taps by rotary switch :
1.25 – 2.5 – 5 – 10 W / 100volt
Rated power RMS :
10 W / 8 ohm
Music power RMS :
20 W / 8 ohm (lo-cut)
Impedance:
100 volt / 8 ohm
SPL; 1W/1m
101dB, max 111 dB
Freq. range
400-10000 Hz
Dispersion
140° conical
IP rating
66
Cable length :
approx. 40 cm
Dimensions Outside Ø :
140 mm x length : 192 mm
Weight including bracket :
1.05 Kg
Mounting holes :
3 x Ø 6.5 mm, 30 mm