ASUS v2-p5g41h User Manual
3-4
Chapter 3: Motherboard info
2. USB device wake-up (3-pin USBPW1-4, USBPW5-8)
Set these jumpers to +5V to wake up the computer from S1 sleep mode
(CPU stopped, DRAM refreshed, system running in low power mode) using
the connected USB devices. Set these jumpers to +5VSB to wake up the
compurer from S3 and S4 sleep modes (no power to CPU, DRAM in slow
refresh, power supply in reduced power mode).
P5QPL-VM EPU
P5QPL-VM EPU USB Device Wake Up
2
1
2 3
+5V
(Default)
+5VSB
USBPW5-8
2
1
1
2
3
+5V
+5VSB
(Default)
USBPW1-4
3. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up feature.
When you set this jumper to pins 2-3 (+5VSB), you can wake up the
computer by pressing a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A on the
+5VSB lead, and a corresponding setting in the BIOS.
P5QPL-VM EPU Keyboard Power Setting
P5QPL-VM EPU
2
1
2 3
+5V
(Default)
+5VSB
KBPWR