APart CM20T-BL Leaflet
TECHNICAL SPECIFICATIONS
APart CM20T
CEILING SPEAKER
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
The APart CM20T 2-way built-in loudspeaker can be used as a 16 Ohm or 100 Volt loudspeaker.
In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4
Ohm amplifier. For 100 Volt use, the CM20T is equipped with a high-quality 20 watt 100 Volt
transformer with several power tappings. Therefore it can be used with high ceilings or places
where more back ground noise is present. The loudspeaker has a 6 ½” enforced Polypropylen
woofer what results in a very low distortion. To complete the sound, a 1” tweeter has been
integrated. It makes the CM20T very suitable for the distribution of microphone calls and back
ground music.
In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4
Ohm amplifier. For 100 Volt use, the CM20T is equipped with a high-quality 20 watt 100 Volt
transformer with several power tappings. Therefore it can be used with high ceilings or places
where more back ground noise is present. The loudspeaker has a 6 ½” enforced Polypropylen
woofer what results in a very low distortion. To complete the sound, a 1” tweeter has been
integrated. It makes the CM20T very suitable for the distribution of microphone calls and back
ground music.
The housing is made of high quality ABS. Because of the special enforced polypropylen woofer
and the aluminium grille, this speaker can be used in humid environments.
The loudspeaker is easy to install, due to its simple, quick mounting system (3 screws which are
hidden behind the loudspeaker grill, what gives the loudspeaker a modern and striking design).
These speakers are standard available in white, black and silver. From 12 pieces on, the
loudspeakers can be painted optionally in any other RAL colour (Ref; PAINT-CM).
CM20T
and the aluminium grille, this speaker can be used in humid environments.
The loudspeaker is easy to install, due to its simple, quick mounting system (3 screws which are
hidden behind the loudspeaker grill, what gives the loudspeaker a modern and striking design).
These speakers are standard available in white, black and silver. From 12 pieces on, the
loudspeakers can be painted optionally in any other RAL colour (Ref; PAINT-CM).
CM20T
white colour
RAL 9010
CM20T-BL
black colour
RAL 9011
CM20T-SLV
silver colour
RAL 9006
Type
Woofer
Tweeter
Impedance
Transfo Power Tappings
RMS Power 16 Ohm
Woofer
Tweeter
Impedance
Transfo Power Tappings
RMS Power 16 Ohm
Rated
Music
Music
100 V
Rated
Music
Music
SPL
1 watt/1 m
Max peak
Frequency Range
Dispersion @ 1 kHz
4 kHz
8 kHz
Dimensions
Frequency Range
Dispersion @ 1 kHz
4 kHz
8 kHz
Dimensions
Outside dia
Cutout dia
Depth
Cutout dia
Depth
Weight
2-way HiFi Pro
6.5” enforced PP, rubber edge
1” silk dome
16 Ohm / 100V
2,5 - 5 - 10 - 20 watt (4k - 2 k - 1k - 500 Ohm)
40 watt
60 watt
20 watt
32 watt
92 dB
106 dB
60 Hz - 20 kHz
180°
80°
45°
205 mm
183 mm
80 mm
1.4 Kg
6.5” enforced PP, rubber edge
1” silk dome
16 Ohm / 100V
2,5 - 5 - 10 - 20 watt (4k - 2 k - 1k - 500 Ohm)
40 watt
60 watt
20 watt
32 watt
92 dB
106 dB
60 Hz - 20 kHz
180°
80°
45°
205 mm
183 mm
80 mm
1.4 Kg