att 5840 User Manual
ANSWERING SYSTEM
PROBLEM SOLUTION
If
CL
appears in the
You need to reset the clock. The answering
message window:
system clock is not set automatically with
incoming Caller ID information.
incoming Caller ID information.
PROBLEM SOLUTION
If the system does not
• Make sure you are calling from a touch
respond to commands
tone phone. When you dial a number,
from a remote touch
you should hear tones. If you hear clicks
tone phone:
instead, the phone is not a touch tone
telephone.
telephone.
• The answering system may not detect
the Remote Access Code while your
announcement is playing. Try waiting
until the announcement is over before
entering the code.
announcement is playing. Try waiting
until the announcement is over before
entering the code.
• Make sure you enter your Remote Access
Code correctly.
• There may be noise or interference on
the phone line you are using. Press keys
firmly.
firmly.
PROBLEM SOLUTION
If your outgoing
• When you record your announcement,
announcement isn’t
make sure you speak in a normal tone of
clear:
voice, about nine inches from the base.
• Make sure there is no “background” noise
(TV, music, etc.) while you are recording.
69
IN CASE OF DIFFICUL
TY
IN CASE OF DIFFICUL
TY
5840_CIB_2ATT 2002.11.7 5:50 PM Page 69