APart CM6T Leaflet
TECHNICAL SPECIFICATIONS
APart CM6T
CEILING SPEAKER
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
The Apart CM6T 2-way built-in loudspeaker is “the reference loudspeaker”. It can be used as a 16
Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on
each channel of a standard 4 Ohm amplifier. For 100 Volt use, the CM6T is equipped with a high-
quality 6 watt 100 Volt transformer with several power tappings. The loudspeaker has a 6 ½”
woofer, made of special enforced polypropylen. This results in a very low distortion. To complete the
sound, a quality 1” tweeter has been integrated. It makes the CM6T very suitable for the distribution
of microphone calls and backgroundmusic.
Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on
each channel of a standard 4 Ohm amplifier. For 100 Volt use, the CM6T is equipped with a high-
quality 6 watt 100 Volt transformer with several power tappings. The loudspeaker has a 6 ½”
woofer, made of special enforced polypropylen. This results in a very low distortion. To complete the
sound, a quality 1” tweeter has been integrated. It makes the CM6T very suitable for the distribution
of microphone calls and backgroundmusic.
The housing is made of high quality ABS. Because of the special enforced polypropylen woofer and
the aluminium
the aluminium
The loudspeaker is easy to install, due to its simple, quick mounting system (3 screws which are
hidden behind the loudspeaker grill, what gives the loudspeaker a modern and striking design).
The standard colour is white RAL 9010. From 12 pieces on, the loudspeakers can be painted
optionally in any other RAL colour
hidden behind the loudspeaker grill, what gives the loudspeaker a modern and striking design).
The standard colour is white RAL 9010. From 12 pieces on, the loudspeakers can be painted
optionally in any other RAL colour
grille, this speaker can be used in humid environments.
Type
Woofer
Tweeter
Impedance
Transfo Power Tappings
RMS Power 16 Ohm
Woofer
Tweeter
Impedance
Transfo Power Tappings
RMS Power 16 Ohm
Rated
Music
Music
100 V
Rated
Music
Music
SPL
1 watt/1 m
Frequency Range
Dispersion @ 1-4-8 kHz
IP rating
Dimensions
Dispersion @ 1-4-8 kHz
IP rating
Dimensions
Outside dia
Cutout dia
Depth
Cutout dia
Depth
Weight
2-way HiFi
6.5” enforced PP, rubber edge
1” dome
16 Ohm / 100V
1,5 - 3 - 6 watt (6.66k - 3.33k - 1.66k)
40 watt
60 watt
6 watt
10 watt
92 dB
60 Hz - 20 kHz
180°-80°-45°
54
205 mm
183 mm
80 mm
1.6 Kg
6.5” enforced PP, rubber edge
1” dome
16 Ohm / 100V
1,5 - 3 - 6 watt (6.66k - 3.33k - 1.66k)
40 watt
60 watt
6 watt
10 watt
92 dB
60 Hz - 20 kHz
180°-80°-45°
54
205 mm
183 mm
80 mm
1.6 Kg