Audiovox av1510d Quick Setup Guide

Page of 3
10A
AV1510D Mobile Multimedia AM/FM/DVD Receiver Quick Start Guide
CHASSIS GROUND
Connect the red wire to the factory
Accessory or Ignition wire, which
receives power when the key is 
turned on.
ACCESSORY
POWER ANTENNA/
REMOTE AMP TURN ON LEAD
 
Positive (+) 12VDC output when the head
unit is turned on. Connect the blue wire to 
a motorized antenna or to an amplifier.
BATTERY
RCA OUTPUT
Connect to an 
optional amplifier.
ANTENNA JACK
Connect to the factory or aftermarket 
antenna lead. (Optional extensions or 
adapters may be necessary depending 
on the type of vehicle you have)
AMP
FILTER   &
FUSE BOX
)
-
(
)
(+
Connect the black wire to the factory ground wire. If a 
factory ground wire is not provided, locate a clean, 
unpainted metal part of the dash and secure the ground 
wire with a "ring" terminal and a sheet metal screw. 
Connect the yellow wire to the battery 
or 12 volt power source that is always 
live. This wire MUST be connected 
for the radio to work.
AMP
Need help?
For technical assistance, call 
the Audiovox customer
support line at 1-800-645-4994.
SPEAKERS
AV1
SUBWOOFER RCA OUTPUT
CENTER RCA OUTPUT
DEDICATED DVD
OUTPUT
Connect optional rear
 screen and left/right
audio for headphones.
PARKING
 
Connect the pink wire to the negative 
parking brake wire. This MUST be 
connected in accordance with 
federal, state, and local laws.
Left Front
Right Front
Left Rear
Right Rear
IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring 
instructions carefully, or have the installation handled by an experienced technician.
AV2
VIDEO OUT
Printed in China