Audiovox jport User Manual
JPORT Installation Instructions
Existing Radio
(Not Included)
1. Choose a mounting location on the dashboard that will allow enough room
behind the dash to run the JPORT cables to the existing car radio.
2. Drill a 3/4" hole in the dashboard.
3.. Remove the white washer and hexagonal nut from the JPORT.
4. Insert the RCA cable ends through the hole in the dashboard from the front.
5. Replace white washer and hexagonal nut on the back side of the dashboard
3.. Remove the white washer and hexagonal nut from the JPORT.
4. Insert the RCA cable ends through the hole in the dashboard from the front.
5. Replace white washer and hexagonal nut on the back side of the dashboard
and secure the JPORT to the dashboard.
6. Plug the RCA cables into the RCA-IN jacks on your existing car radio.
7. Plug a device with a 3.5 mm jack into the JPORT to test the connections.
8. Replace the dashboard components.
7. Plug a device with a 3.5 mm jack into the JPORT to test the connections.
8. Replace the dashboard components.
Radio's
Auxilliary Input
JPORT
White Washer
Hexagonal Nut
Dashboard
3.5 mm Jack
MP3 Player
(Not Included)
4 - Foot Cable with 3.5mm Male Jacks (Included)
Made in China/Printed in China
3/4 Inch
Recommended Size
for Mounting Hole