Audiovox prestige platinum xr6900 User Manual

 1 Five Button Programmable 900MHz RF Transmitter
 1 Six Button Programmable 900MHz RF LCD Transceiver
 Seven Channel Receiver (capable of accepting 4 transmitters)
 Code Hopping Technology
 Combination Remote Start Safety Control/Valet/Programming Push-

   Button LED Switch

 Safe Start RF Control (Double Push Of RF Transmitter)
 Selectable Automatic Timed Start Mode
 ( + ) and ( - ) Keyless Entry Outputs
 On-Board Start Relay
 On-Board Accessory Relay
 3 On-Board Ignition Relays
 On-Board Parking Light Relay
 Ignition 2 & 3 Relay Selectable On or Off During Cranking
 Ground Output While Running  / Shock By-Pass / GM VAT Output

   (relay required)

 Tach Signal Learning Circuit
 Two ( + ) and Two ( - ) Safety Shutdown Circuits
 Alarm By-Pass Output
 Channel 3 Output for Remote Trunk Release (relay required)
 Channel 4, 5, 6, & 7 Output to Control Optional Accessories
 Selectable Steady or Flashing Parking Lights for Run Indication
 Selectable Run Times
 Selectable Door Lock Output Pulse Timing
 Optional Illuminated Entry Output (Relay Required)
 Vehicle Horn Activation Output For R/S Annunciation
 External Activation Control Input

 Telematic Upgrade Ready
 Plug In Flash Logic By-Pass Capable
 Remote Power Window Control
 Multiple Vehicle Capable
 Turbo Timer Mode

CAUTION!  Be certain that the vehicle is outdoors before using this or any remote vehicle

starting device.  A running engine produces dangerous carbon monoxide fumes
which can be harmful or fatal if prolonged exposure occurs.  DO NOT remote
start the vehicle if the car is garaged.

Owner’s Manual

Page Call Out:
From within the vehicle, if the valet push button is pressed for three seconds, the alarm unit in the vehicle
will transmit to the LCD remote and a beep tone will be heard and a phone icon will be displayed on the
hand held transmitter indicating that someone is calling you to the vehicle.

Rev a to include transmitter setting chart 1/11/08