Axis 20443r2 User Manual

Pan/Tilt devices connected to the AXIS 230’s ports can be controlled directly from the web 

interface, or by third-party applications. When using such a device, Pan and Tilt bars are 

automatically displayed, as shown in the example below. Note that the selected Pan/Tilt 

driver determines the actual layout of the controls. Other functions, not shown here, may 

also be available.

•Pan/Tilt controls can be disabled in the Live View layout settings and might not be available in the 
user interface.
•Clicking anywhere on a bar’s gradient allows for a “smooth” adjustment; whereas clicking on the 
left or right arrows causes a stepped incremental change.

Clicking on the Setup link at the top left of the Live View page opens the Basic 

Configuration page, which provides links to the basic settings required by most systems. 

The settings found in the Basic Configuration section are described under the relevant 

section in the following pages.

Pan bar
Allows smooth or stepped hori-
zontal panning of the camera. 

Allows smooth or 
stepped vertical pan-
ning of the camera.

Returns the camera
to the ‘Home’ position. 

Allows smooth camera zoom between 
telescopic and wide viewing.

To enable quick and accu-
rate camera positioning, up 
to 20 preset camera posi-
tions can be set and 
selected at any time from 
the drop-down dialog. 

Allows smooth focusing.

Turns on automatic focusing.

Click-in-picture
Point and click to move the 
view to a new location.