Axis 26031r3 User Manual

Page of 65
 
41 
AXIS 216FD - System Options
Note that DSCP values can be entered in decimal or hex form, but saved values are always 
shown in decimal.
For more infomation on Quality of Service, please see the Axis support web at 
www.axis.com/techsup
SOCKS
SOCKS is a networking proxy protocol. The AXIS 216FD can be configured to use a SOCKS 
server to reach networks on the other side of a firewall/proxy server. This functionality is 
useful if the AXIS 216FD is located on a local network behind a firewall, but notifications, 
uploads, alarms, etc., need to be sent to a destination outside the local network (e.g. to the 
Internet).
SMTP (email)
Enter the host names (or IP addresses) and port numbers for your primary and secondary 
mail servers in the fields provided, to enable the sending of notifications and image/video 
email messages from the camera to predefined addresses via SMTP.
If your mail server requires authentication, check the box for Use authentication to log in 
to this server and enter the necessary information.
SNMP
The Simple Network Management Protocol (SNMP) allows remote management of network 
devices. Depending on the level of security required, select the version of SNMP to use. The 
three levels of security are:
• SNMP V1 - includes no security.
• SNMP V2c - uses very simple security. The community name can be specified as a pass-
word for read or read/write access to all supported SNMP objects. The community is the 
the group of network devices using SNMP.
• SNMP V3 - provides encryption and secure passwords. HTTPS must be enabled.
UPnP™
The camera includes support for UPnP
, which is enabled by default. If also enabled on 
your computer, the camera will automatically be detected and a new icon will be added to 
“My Network Places.” 
Note: 
UPnP must also be enabled on your Windows XP or ME computer. To do this, open the Control Panel from 
the 
Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open 
the 
Networking Services section. Click Details and then select UPnP as the service to add.