Axis 26926r2 User Manual

The Live View page also displays the Pan/Tilt/Zoom controls.  

These are enabled/disabled for specified users by the administrator under System Options > 

Security > Users > User List. 

The Pan, Tilt and Zoom bars control their respective functions in two different ways. Clicking 

anywhere on the bar's gradient allows for a 'smooth' adjustment of the camera's position, whilst 

clicking on the arrows at the two ends of the bar cause a stepped, incremental change.

Zoom out to overview image will set the camera to the minimum zoom position. Note that when 

in this position, the camera cannot pan or tilt.

The AXIS 212 PTZ can be controlled using one-click PTZ, click-in-image movement. 

Click the Ctrl panel button to display the control panel, where the following selections 

are available:

• Navigation mode: Center will instantly move the camera view to center on the 

position that was clicked. 

Joystick moves the camera in the direction indicated by a mouse click, relative 

to the center of the image. The further from the center the image is clicked, the 

greater the movement.

• If  in  Center mode, select whether the camera should pan, tilt or zoom to the position in the image that 

was clicked.

The scroll wheel on the mouse can also be used to control the zoom.

The AXIS 212 PTZ can transmit audio to clients using either the built-in microphone or a connected external 

microphone and can play audio received from clients via a connected speaker. There are audio controls for 

controlling the microphone and the client computer’s speaker output. These controls are only available when 

audio is enabled, see AXIS Media Control, on page 9 and Audio, on page 16.

Click the Speaker and Microphone buttons to switch the sound off and on for the speaker and 

microphone, respectively.  

 

Use the sliders to control the volume on the speaker and microphone. The volume can be set 

between 0 and 100.

When using Half-duplex mode, this button toggles between allowing you to speak and listen. The first 

icon indicates that you can talk and the speaker connected to the camera will play your voice. The 

second indicates that you will hear audio from the camera.  

 

Simplex - Network Camera speaker only - the speaker connected to the AXIS 212 PTZ will play audio 

transmitted from any web client. This mode requires you to use the push to talk button.

Simplex - Network Camera microphone only - transmits audio from the AXIS 212 PTZ to any web clients. 

This can be used in remote monitoring, web attractions etc., to provide live audio from a monitored situation.

 

External microphone and speaker are optional and not included.