Axis 25221r3 User Manual

Recording video to the AXIS 262’s hard disk can be scheduled to take place at certain 

times, triggered by an alarm or started manually. For example, if a camera is used to 

monitor a workplace, you may want to record video Monday to Friday during work hours, 

and also have recordings triggered from an incoming signal from an input, when e.g. a 

door is opened or motion is detected. You can also start and stop the recording on any of 

the cameras manually from the Main View.

The camera selection tab shows if video from the camera is being recorded and what 

triggered the recording.

You can configure the times and days when recordings will occur each week. Recordings 

can be scheduled to start and stop multiple times on any particular day, e.g. every Tuesday 

between 10:00-12:45, 14:00-16:15 and 20:30-23:00. Each day of the week can have 

different schedules or the same time periods can be set for multiple days simultaneously.

1. Click 

> Schedule in the device’s Web pages.

2. Select the camera to configure from the Camera number drop-down list.
3. Select the day(s) and then set the start time, end time and frame rate.
4. Click Save and repeat for additional schedules. 

Camera 1: Scheduled recording in progress
Camera 2: Alarm recording in progress
Camera 3: Manual recording in progress
Camera 4: Not recording