Axis 25221r3 User Manual
7
AXIS 262 - Product Description
AXIS 262 rear panel
RS-232 connector
For the connection of a UPS (Uninterruptible Power Supply) unit. The approved UPS model
For the connection of a UPS (Uninterruptible Power Supply) unit. The approved UPS model
is Smart-UPS from APC.
Network connector
Connect the AXIS 262 to your network using a standard CAT-5 network cable.
Connect the AXIS 262 to your network using a standard CAT-5 network cable.
9-pin I/O terminal connector
Used to connect external devices, see I/O Terminal Connector, on page 34 for more
Used to connect external devices, see I/O Terminal Connector, on page 34 for more
information.
Factory setup button
Used to reset the AXIS 262 to the factory default settings, see Resetting the AXIS 262, on
Used to reset the AXIS 262 to the factory default settings, see Resetting the AXIS 262, on
Power button
To shut the AXIS 262 down correctly, press and hold this button until a “beep” sound is
To shut the AXIS 262 down correctly, press and hold this button until a “beep” sound is
heard. Shutdown will then complete after approximately 20 seconds. To start the unit,
press the button once.
Power adapter connector
Connect the power supply cable to the AXIS 262. The AXIS 262 starts up automatically
Connect the power supply cable to the AXIS 262. The AXIS 262 starts up automatically
after connecting the power supply cable to a power source.
Important!
• Never disconnect the power cable when the AXIS 262 is on.
• Use the power button to switch off the AXIS 262.
• Use the power button to switch off the AXIS 262.
RS-232 connector
9-pin I/O terminal
Power button
Power adapter
Network connector
Factory setup button
connector
connector