APart MICPAT-6 Leaflet
TECHNICAL SPECIFICATIONS
APart MICPAT-6
6-ZONE PAGING MICROPHONE
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
MICPAT-6 is a sturdy high quality 6-zone paging microphone. It has been designed especially for
use with the APart MA246 six-zone/ 100 Volt paging amplifier.
It is possible to connect multiple MICPAT-6's in parallel by using an RJSPLIT. Separate microphone
cables are also connected in parallel. Connection to the MA246 is done by a standard CAT5
cable and a separate balanced MIC cable. The maximum approved cable length is 100 meters.
Please note that MICPAT-6 can not be linked to a PC and is not network compatible !
use with the APart MA246 six-zone/ 100 Volt paging amplifier.
It is possible to connect multiple MICPAT-6's in parallel by using an RJSPLIT. Separate microphone
cables are also connected in parallel. Connection to the MA246 is done by a standard CAT5
cable and a separate balanced MIC cable. The maximum approved cable length is 100 meters.
Please note that MICPAT-6 can not be linked to a PC and is not network compatible !
When using more than one microphone, MICPAT-6 automatically detects if another microphone
is already paging. This is indicated by an orange call LED. Once the paging is finished, the LED
will return to green.
is already paging. This is indicated by an orange call LED. Once the paging is finished, the LED
will return to green.
To make a paging call, the user can select the zones by pushing buttons 1-6. The buttons will
light red in order to indicate that paging for these respective zones is selected. It is possible to
select all zones at once by pushing the 'ALL' button. The paging call goes out once the user
pushes the 'CALL' button.
light red in order to indicate that paging for these respective zones is selected. It is possible to
select all zones at once by pushing the 'ALL' button. The paging call goes out once the user
pushes the 'CALL' button.
The six zone buttons and the 'ALL' button are latching, so the user can permanently select the
zones he needs most. The 'CALL' button is push-to-talk. Only by pushing this button, a paging
call goes out to the selected zones. During paging, the call light will light orange and all other
microphones connected in parallel will be temporarily disabled (busy).
.
No more searching for the right accessory: MICPAT-6 is a plug-and-play microphone for the
MA246. APart offers the one stop shopping solution and takes unnecessary worries off an
installers' mind!
zones he needs most. The 'CALL' button is push-to-talk. Only by pushing this button, a paging
call goes out to the selected zones. During paging, the call light will light orange and all other
microphones connected in parallel will be temporarily disabled (busy).
.
No more searching for the right accessory: MICPAT-6 is a plug-and-play microphone for the
MA246. APart offers the one stop shopping solution and takes unnecessary worries off an
installers' mind!
Type:
Table type active multizone paging mic
Polar pattern:
Directional, low feedback, electret capsule
Frequency range:
80 Hz - 20 kHz
Rated output level:
2 V balanced line output
Rated output impedance:
50 Ohm
Connection:
bus system accepts multiple units in parallel
Paging:
6 zone, individually selectable / all at once
Colour :
grey
Weight (without cable):
0.550 kg
Dimensions (base unit)
115 (W) X 162 (D) mm X 60 mm (H)
Gooseneck length:
275 mm
Cable Type: CAT5 terminated with RJ45 connector (supplied)/balanced microphone
cable (not terminated) : Black = GND / Blue = -sgl / Brown = +sgl
Cable length:
cable (not terminated) : Black = GND / Blue = -sgl / Brown = +sgl
Cable length:
5 m (supplied)