advantor advantage plus-base module User Manual

Specifications and part numbers are subject to change without notice.

The Advantage

®

 plus Base Module is the primary communication processor and control unit for

Advantage plus systems. Installed within the protected facilities, it is available in a standard UL version,
attack version, or a military J-SIIDS version. It interfaces with all other optional modules and devices, and
provides communication with the Advantor integrated monitoring system to transmit and display all
security messages from the facility. It also includes listen back
audio verification for up to four audio inputs.

• 17.25” W x 14.5” H x 3.25” D ( 43.82cm x 36.83cm x

8.26cm)

• 20 gauge cold rolled steel with lock and key
• Color: Light gray w/ Advantor logo

• 17.25” W x 14.5” H x 3.25” D ( 43.82cm x 36.83cm x

8.26cm)

• 18 gauge cold rolled steel with lock and key
• Color: Light gray w/ Advantor logo

• 8.5" W x 7.54" H   (21.59cm x 19.15cm)

• Direct replacement for current J-SIIDS applications
• PCB is a replacement for the current transmitter and

processor in conversions

• 16 programmable, supervised, hard-wired points

• N/C, N/O, or Both (dry contacts)
• Programmable alarm codes
• Assignable to any of 8 separate arming partitions

(protected areas)

• All alarm points operate normally under ground

fault conditions

• Expandable to a total of 144 points with Expansion

Modules & another 63 points with the Wireless
Module

• Local bell drive: 12V at 1.25 Amp maximum
• Audible keypad beeper

• Four balanced audio inputs supporting four

verification audio sensors or any combination of up to
eight optional SmartAudio or ListenIn Modules for up
to 128 audio inputs.

• Interfaces with one card reader or biometric device for

secure, user-friendly arm/ disarm of security and
access control verification for up to 100 users. Access
Modules may be added to the system to extend the
capabilities to upto 10,000 users.

• UL Grade AA, upgradeable to DES Class A
• Supervision for Compromise, and Failure

• Pulse or DTMF dialing
• Integrated cut line supervision
• RJ31X jack connection
• Secondary dial line capability with optional TelPlus

Module

• Secondary cellular communication with optional

Cellular Module

• Optional Telco “Level 2” Surge Protection

• 16 keypads
• 8 partition capability
• Programmable switch arming via momentary contact

closure

• Programmable access card arming via integrated

card reader input (wiegand)

• Programmable arm/disarm functions

• Single key arming
• Non-reporting
• Reporting
• Arm at shift

 • Optional SCIF package

A

A

A

A

AVR PLUS BASE-C sho

VR PLUS BASE-C sho

VR PLUS BASE-C sho

VR PLUS BASE-C sho

VR PLUS BASE-C shown

wn

wn

wn

wn

P/N 09820481,   Rev. A
6/98