advantor lcd plus keypad User Manual

1

See the Advantage 3000 Series Systems Installation and Service Manual  or the

Advantage plus Service Manual for panel theory and service procedures.

See the SONICS Database Management Manual  or the Advantage

for options programming procedures.

Advantage

®

 is a trademark of Advantor Corporation

The following control panels support LCD plus keypads:

•

Advantage plus

•

ADV 3250

•

ADV 3450

•

AAM4+

•

ADV 3650

•

AAM4-C+

•

ADV 3475

•

AAM4-A

•

ADV 3350+

•

AAM4C-A

The LCD plus keypad communicates with control panels over the
RS-485 communications bus, much like Advantage Access

®

Modules.
Jumpers inside each LCD plus keypad assign it with a unique keypad
bus address.  (Note that LCD plus keypads can share the same
address with an Advantage Access Module).

NOTE: LCD plus KEYPADS INSTALLED IN UL BUR-

GLARY AND FIRE SYSTEMS SHALL BE LO-
CATED WITHIN 20 FEET OF THE ALARM EN-
CLOSURE AND ALL KEYPAD WIRING SHALL BE
ENCLOSED IN CONDUIT.
USING THE ADAPTER PLATE (P/N 09004301)
MOUNT THE LCD plus KEYPAD ON A
STANDARD ELECTRICAL UTILITY BOX TO
ALLOW CONDUIT CONNECTION AT THE
KEYPAD.

See the SONICS Database Management Manual  or the Advantage

Access for Windows User’s Guide for LCD plus keypad options
programming.

The LCD plus keypad shown in Figure 1 is a 15 button wall-
mounted keypad in its own enclosure.  The keypad contains a four
line, 20 character per line Liquid Crystal Display (LCD) that
displays the system's status in plain English.

Figure 1.  LCD plus Keypad

LCD plus keypad arming features include Automatic, Secure
(employee verification), and Automatic No-dial arming/disarming.
The keypad also provides the following user initiated functions:

•

Emergency Duress (ambush) alarming

•

Intermediate arming with OCCUPIED DELAY or OCCU-
PIED INSTANT alarm reporting

•

Chime Mode

•

User assistance request

•

Cancel alarm generation

•

Auxiliary output control

•

On-site test procedure.

No part of this document may be reproduced or distributed in any form or by any means, or stored

in a database or retrieval system, without the prior written permission of Advantor Corporation.

Advantor Corporation warrants each new product of its manufacture, to be free from defects in material and workmanship.
It will repair or replace defective parts for a period of 24 months from the date of manufacture, providing the equipment has not been subjected to
abnormal conditions such as misuse, abuse, misapplication, alteration, lightning damage or damage by an Act of God.  This excludes packing,
handling and shipping charges from the Customer.  The limited warranty is restricted to the original purchaser.