Akai mpc2000 User Manual
Page 104
Chapter 6: Creating and Editing Programs
Setting the Pitch
This sets the pitch of the sound assigned to each note.
Select the Tune: field with the CURSOR key and enter the number
with the DATA wheel. It is also possible to enter directly with the
numeric pad. In this case press ENTER after you have entered the
number.
with the DATA wheel. It is also possible to enter directly with the
numeric pad. In this case press ENTER after you have entered the
number.
To display the following window, select the Tune: field and press
the OPEN WINDOW key.
the OPEN WINDOW key.
• Tune:
This is the same as the Tune: field on the previous screen.
• Prog tempo:
This displays the change in tempo between the sample set in Trim
mode and the Tune set here. It is not possible to change the value.
This is convenient in matching the tempo of phrase samples such as
the drum loop.
mode and the Tune set here. It is not possible to change the value.
This is convenient in matching the tempo of phrase samples such as
the drum loop.
• Velo>Pitch:
This allows the velocity to control the pitch. The larger the value,
the higher the pitch becomes with the velocity impact. When this is
set to a negative value, the pitch becomes lower as the velocity im-
pact increases. When this is set to 0, the pitch does not change
regardless of the velocity impact.
the higher the pitch becomes with the velocity impact. When this is
set to a negative value, the pitch becomes lower as the velocity im-
pact increases. When this is set to 0, the pitch does not change
regardless of the velocity impact.
• Velo:
This displays the velocity value in real-time by hitting the DRUMS
PAD.
PAD.