Akai mpc2000 User Manual
Page 110
Chapter 7: Mixer Functions
Setting the Para Out and Effect Send (Option)
When the optional 8 Para Out Board (IB-M208P) or effect board
(EB16) is installed, set the output of the sound or the effect send in
the Individual Out screen.
(EB16) is installed, set the output of the sound or the effect send in
the Individual Out screen.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:If 8 Para Out Board (IB-M208P) or effect board
(EB16) is not installed, nothing will change with
the settings here. Furthermore, the effect board
(EB16) does not comply with MPC2000 version 1.0
the settings here. Furthermore, the effect board
(EB16) does not comply with MPC2000 version 1.0
Press MIXER (7 on the numeric pad) while holding down the SHIFT
key to display the Mixer screen and press INDIV[F2] to display the
Individual Out screen.
key to display the Mixer screen and press INDIV[F2] to display the
Individual Out screen.
Set the output jack for the sound the top of the screen. Set the send
level on the bottom of the screen.
In the same way as in the stereo mixer screen, you can switch the
banks with the PAD BANK key.
level on the bottom of the screen.
In the same way as in the stereo mixer screen, you can switch the
banks with the PAD BANK key.
Assigning Para Out
Move the cursor to the top with the CURSOR UP key. Use the CUR-
SOR LEFT or RIGHT key to select the channel you want to set the
output to. It is also possible to select the channel by hitting the drum
pad.
SOR LEFT or RIGHT key to select the channel you want to set the
output to. It is also possible to select the channel by hitting the drum
pad.
Select the output with the DATA wheel. The numbers one through
eight correspond to each para out number. When the sound is in ste-
reo, it is possible to select two digit numbers such as 12 or 34. The
left sound will be output from one and three, and the right sound from
two and four respectively. E will send effects.
eight correspond to each para out number. When the sound is in ste-
reo, it is possible to select two digit numbers such as 12 or 34. The
left sound will be output from one and three, and the right sound from
two and four respectively. E will send effects.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:If 8 Para Out Board (IB-M208P) or effect board
(EB16) is not installed, nothing will change with
the settings here. Furthermore, the effect board
(EB16) does not comply with MPC2000 version 1.0
the settings here. Furthermore, the effect board
(EB16) does not comply with MPC2000 version 1.0