Akai mpc2000 User Manual
Page 141
Chapter 9: Disk Operation
3. Select the type of data you want to save in the Type: field. The
operation will differ slightly depending on the selected type.
4-1. Save All Sequence & Songs
This saves all the sequence and song data on the MPC2000
memory.
Select Save All Sequence & Songs. The file name will
appear in the File: field.
Press DO IT[F6].
memory.
Select Save All Sequence & Songs. The file name will
appear in the File: field.
Press DO IT[F6].
It is possible to change the file name you are saving in the File
name: field.
name: field.
Press the CURSOR LEFT or RIGHT key or use the DIGIT wheel
to move the cursor and enter the characters using the DATA
wheel. It is also possible to enter directly from a drum pad. When
the pad is pressed, the letter displayed on the top right of the pad
will be entered. For example, to enter A, press PAD1 once and to
enter B, press PAD1 twice. It is possible to enter a space with the
16 LEVELS key. To switch between lower and upper case, press
the PAD BANK key.
to move the cursor and enter the characters using the DATA
wheel. It is also possible to enter directly from a drum pad. When
the pad is pressed, the letter displayed on the top right of the pad
will be entered. For example, to enter A, press PAD1 once and to
enter B, press PAD1 twice. It is possible to enter a space with the
16 LEVELS key. To switch between lower and upper case, press
the PAD BANK key.
After entering a name, press the ENTER key to confirm. If you
save without pressing the ENTER key, the entered name will be
ignored and the file will be saved under the previous name.
save without pressing the ENTER key, the entered name will be
ignored and the file will be saved under the previous name.
4-2. Save a Sequence
This saves a sequence data within the MPC2000 memory. THE
MPC2000 sequence data will be saved as a standard MIDI file.
Select Save a Sequence and select the sequence you want
to save in the File: field.
MPC2000 sequence data will be saved as a standard MIDI file.
Select Save a Sequence and select the sequence you want
to save in the File: field.
Press DO IT[F6].