Akai mpc2000 User Manual

Page 144

Chapter 9: Disk Operation

In cases such as Save All Program & Sounds, where a large quantity
of data is being saved on a floppy disk, one disk may not be enough.  In
this case, the following window will appear when there is not enough
space left on the disk after the first disk becomes full.

Insert a new floppy disk here.  If it is possible to erase all the data on
the newly inserted disk, press WIPE[F3].  The Wipe Disk window will
appear, and by press DO IT[F5] the contents of the disk will be
erased and the rest of the data will be saved.  If you do not want to
erase the contents of the newly inserted disk, press SAVE[F5] on the
Disk is full!! window to save the data to the remaining disk space.
When the Disk is full!! window is displayed, the Change disk to
continue!! message will appear if you do not change the disk
and press WIPE[F3] or SAVE[F5].  In this case, insert a new disk and
press WIPE[F3] or SAVE[F5].

Note:

Note:

Note:

Note:

Note: If you are saving data to a SCSI drive, the disk must be

MPC2000 formatted in order to save data from the
MPC2000.  You also cannot execute save if the disk se-
lected in the Device: field is a disk that cannot be writ-
ten to such as the CD-ROM.