Akai mpc2000 User Manual
Page 37
Chapter 3: Recording Sequences
Setting the Tempo
Set the tempo of the sequence.
: Move the cursor to a field and set the tempo by rotating the DATA
wheel.
Enter 4 digits if you are using the numeric pad to enter. For example,
to set the value to 120.5, enter “1205.” In this case, the tempo is con-
firmed when the fourth digit is entered. To set the value to 88.5, enter
“885” and press the ENTER key to confirm the entry.
to set the value to 120.5, enter “1205.” In this case, the tempo is con-
firmed when the fourth digit is entered. To set the value to 88.5, enter
“885” and press the ENTER key to confirm the entry.
Note:
Note:
Note:
Note:
Note: If you do not press the ENTER key and move to other fields
or pages, the entered data will be ignored and the tempo
will not change.
will not change.
Tempo Change Window
Select a tempo field and open the Tempo Change window by pressing
the OPEN WINDOW key.
the OPEN WINDOW key.
• Tempo Change:
Set the tempo change ON or OFF.
• bar.beat.tick
This is the point where the bar.beat.tick tempo change event is in-
serted.
serted.
• %:
Set the tempo change event to the ratio of the original sequence
tempo set in the main screen.
tempo set in the main screen.
•
:
Set the tempo change event using an absolute value.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:The %: and the : affect each other and the value
of either will automatically change when a value
is entered to one of the two.
is entered to one of the two.