Akai mpc2000 User Manual

Page 46

Chapter 3: Recording Sequences

Move the cursor to the Tr: field and select the track by rotating the
DATA wheel.  The name and number of each track will appear.

To open the Track window, select the Tr: field and press the OPEN
WINDOW key.

• Track name:

This changes the name of the track.

Move the cursor using CURSOR LEFT or RIGHT keys, or the
DIGIT wheel and enter letters with the DATA wheel.  It is also pos-
sible to directly enter letters from the DRUMS PAD.  The letter
shown on the top right will be entered when PAD is pressed.  For
example, A will be entered if you press PAD1 once and B if you press
it again.  Use the 16 LEVELS key to enter a space.  To switch be-
tween lower and upper case keys, press the PAD BANK key.

Enter a name and press the ENTER key to confirm.

Note:

Note:

Note:

Note:

Note: If you do not press the ENTER key and move the Default

Name: field or other pages with the CURSOR DOWN
key, the entered name will be ignored and the name will
not change.

• Default:

This sets the default name of the track.  It is possible to set a default
track name  to each track.
Enter the name in the same way as Track name.