Akai mpc2000 User Manual
Page 74
Chapter 4: Editing Sequences
The selected track moves to the left. Here, if you rotate the DATA
wheel again, the list on the right will scroll.
wheel again, the list on the right will scroll.
When the place you want to move is displayed, press INSERT[F6] to
go back to the list on the right.
go back to the list on the right.
The track name remains the same and new track numbers are set in
order.
order.
Transposing a Track
This allows you to set the transposition of the data for each track.
In the main screen, press EDIT[F2] , display the Event Copy screen,
and press TRANS[F4].
In the main screen, press EDIT[F2] , display the Event Copy screen,
and press TRANS[F4].
• Tr:
This selects the track you want to transpose. When this is set to 00,
all the tracks will be transposed. The Drum tracks however, will
not be affected by the transposition.
all the tracks will be transposed. The Drum tracks however, will
not be affected by the transposition.
• Transpose amount:
This sets the value of the transposition. It is possible to set a plus-
minus twelve for each half tone. Plus twelve is one octave up and
minus twelve is one octave down. The settings here do not directly
change the data but only transpose the data when they are played
back.
minus twelve for each half tone. Plus twelve is one octave up and
minus twelve is one octave down. The settings here do not directly
change the data but only transpose the data when they are played
back.