Akai mpc2000 User Manual
Page 87
Chapter 5: Song Mode
Setting the Locate Point
It is possible to locate in the Now: field using the DATA wheel.
Select the Now: field with the CURSOR key and increase or decrease
the number with the DATA wheel to locate.
the number with the DATA wheel to locate.
The Now: field allows you to switch and display the bar/beat/clock
and hour/minute/second.
Select the Now: field and press the OPEN WINDOW key.
and hour/minute/second.
Select the Now: field and press the OPEN WINDOW key.
• Display style:
Select BAR,BEAT,CLOCK to display the bar, beat, and clock.
Select HOUR,MIN,SEC to display the hour, minute, and second.
Select HOUR,MIN,SEC to display the hour, minute, and second.
• SMPTE start time:
Select HOUR,MIN,SEC in Display style: to start the
time display on the main screen from the time set in this field. This
can also be used to synchronize MTC (MIDI time code) or SMPTE
time codes.
time display on the main screen from the time set in this field. This
can also be used to synchronize MTC (MIDI time code) or SMPTE
time codes.
• SMPTE frame rate:
This sets the frame rate of the time code used to synchronize the
MTC or SMPTE code. Synchronization is described in “MIDI/SYNC
Mode”.
MTC or SMPTE code. Synchronization is described in “MIDI/SYNC
Mode”.