Apogee x-digi-mix card User Manual

APOGEE ELECTRONICS

To record at a higher resolution sample rate:

1) Create a Pro Tools session whose sample rate is half the desired rate (i.e., create a 44.1kHz 

session to record 88.2kHz audio.

2) Once the Apogee interface has recognized the sample rate of the session, manually set it to the 

desired high resolution sample rate. When using more than one Apogee interface, the Slave 
interfaces must be clocked from the Master Word Clock Output. 

3) For every track of high resolution audio desired, create a stereo track in the session. Routing of 

audio is as depicted below:

4) Keep in mind that it’s possible to run one interface at a lower sample rate (for example to play back 

tracks), and a second interface at a higher sample rate (for example to record an analog mix of the 
tracks being played back).

Input 1

Tracks 1-2

Output 1

Input 2

Tracks 3-4

Output 2

Input 3

Tracks 5-6

Output 3

Input 4

Tracks 7-8

Output 4