ART sgx 2000 User Manual
19
6
REVERB
ON
MC 75:MIDI CNTLR
7
DELAY
ON
MC 76:MIDI CNTLR
8
PITCH TRANSPOSER
ON
MC 77:MIDI CNTLR
9
FLANGE/CHORUS
ON
MC 78:MIDI CNTLR
10
SPECIAL EFFECTS
ON
MC 79:MIDI CNTLR
*The default status is On when the effect is selected.
MIDI Event data Monitoring Mode
When you select this Mode, MIDI information is displayed in either easy to read
and understand or technical terms. The LCD displays certain MIDI events as they
occur, regardless of which MIDI channel is selected. Information displayed is the
MIDI event itself, its attributes with a choice of display formats (in either
decimal or hexadecimal base 16).
When you select this Mode, MIDI information is displayed in either easy to read
and understand or technical terms. The LCD displays certain MIDI events as they
occur, regardless of which MIDI channel is selected. Information displayed is the
MIDI event itself, its attributes with a choice of display formats (in either
decimal or hexadecimal base 16).
For detailed information, please refer to the MIDI DATA MONITOR section.
PRESS ENTER TO:
SEND A PRESET
Dump a single preset via MIDI to another SGX 2000 or MIDI storage device.
SEND A PRESET
Dump a single preset via MIDI to another SGX 2000 or MIDI storage device.
Sending a Preset
Transferring a single preset to another SGX 2000 or a suitable MIDI device is
accomplished by selecting the SEND A PRESET value and pressing the Enter button.
Transferring a single preset to another SGX 2000 or a suitable MIDI device is
accomplished by selecting the SEND A PRESET value and pressing the Enter button.
SEND ENTIRE MIDI PROGRAM TABLE
Dump entire MPT via MIDI to another SGX 2000 or MIDI storage device.
Dump entire MPT via MIDI to another SGX 2000 or MIDI storage device.
Sending MPT Information
Transferring the entire MPT to another SGX 2000 or a suitable MIDI device is
accomplished by selecting the SEND ENTIRE MPT value and pressing the Enter
button.SEND ALL PRESETS
Dump all presets via MIDI to another SGX 2000 or MIDI storage device.
Transferring the entire MPT to another SGX 2000 or a suitable MIDI device is
accomplished by selecting the SEND ENTIRE MPT value and pressing the Enter
button.SEND ALL PRESETS
Dump all presets via MIDI to another SGX 2000 or MIDI storage device.
Sending all Preset Information
Transferring all presets to another SGX 2000 or a suitable MIDI device is
accomplished by selecting the SEND ALL PRESETS value and pressing the Enter
button.
Transferring all presets to another SGX 2000 or a suitable MIDI device is
accomplished by selecting the SEND ALL PRESETS value and pressing the Enter
button.
IMPORTANT NOTE For:
RECEIVING Preset and MPT Information
To dump MIDI data into the SGX 2000 from either another SGX 2000 or an external
MIDI device you must make sure that the MIDI channels match. The SGX 2000 will
accept MIDI data at all times regardless of what operating mode it is in.
RECEIVING Preset and MPT Information
To dump MIDI data into the SGX 2000 from either another SGX 2000 or an external
MIDI device you must make sure that the MIDI channels match. The SGX 2000 will
accept MIDI data at all times regardless of what operating mode it is in.
PERFORMANCE MIDI [PM]
Performance Midi allows the SGX 2000 to have up to eight of its parameters per
preset controlled simultaneously via MIDI. Selection of the parameter to be
controlled, the actual MIDI controller, and the Low and High value of the
parameter may be programmed from the front panel.
Performance Midi allows the SGX 2000 to have up to eight of its parameters per
preset controlled simultaneously via MIDI. Selection of the parameter to be
controlled, the actual MIDI controller, and the Low and High value of the
parameter may be programmed from the front panel.