ART sgx 2000 User Manual
47
APPENDIX B
EXAMPLES
COPYING A PRESET
You may copy a preset from any location into another easily. (If you want to copy
a factory preset into another factory preset location, you must first Unlock the
destination preset.) To copy a factory preset into one of the 90 user presets
follow these steps.
You may copy a preset from any location into another easily. (If you want to copy
a factory preset into another factory preset location, you must first Unlock the
destination preset.) To copy a factory preset into one of the 90 user presets
follow these steps.
-Enter EDIT Mode.
-Select the preset you want copied by pressing the Preset button and using the
Encoder to dial it up.
-Press the RECALL button.
-Use the Encoder to select the preset location you are copying to i.e. Preset
111.
-Press the STORE button.
*The preset has now been copied and stored to the new location.
-Select the preset you want copied by pressing the Preset button and using the
Encoder to dial it up.
-Press the RECALL button.
-Use the Encoder to select the preset location you are copying to i.e. Preset
111.
-Press the STORE button.
*The preset has now been copied and stored to the new location.
FACTORY RESET
There is a Factory Reset sequence which will reinitialize the SGX 2000 to ALL of
its original values. Be sure that you have either downloaded or kept a written
record of the Presets you want saved since they will be eliminated. To perform a
Factory Reset you must press and hold the PRESET, 0/ENTER and 4/MIDI buttons
simultaneously.
There is a Factory Reset sequence which will reinitialize the SGX 2000 to ALL of
its original values. Be sure that you have either downloaded or kept a written
record of the Presets you want saved since they will be eliminated. To perform a
Factory Reset you must press and hold the PRESET, 0/ENTER and 4/MIDI buttons
simultaneously.
EXAMPLE 1:
Editing the MPT from the SGX 2000 front panel controls.
Editing the MPT from the SGX 2000 front panel controls.
In this example, we will edit the MPT so when MIDI numbers 1 and 2 are received,
SGX 2000 PRESETS 60 and 151 will be recalled. It is assumed that the SGX 2000's
MPT has not been edited.
SGX 2000 PRESETS 60 and 151 will be recalled. It is assumed that the SGX 2000's
MPT has not been edited.
-Make sure you are in the EDIT Mode. (Press EDIT button if not)
-Press the MIDI button.
-Press the Param button.
-Turn the Encoder until you see in the LCD:
-Press the MIDI button.
-Press the Param button.
-Turn the Encoder until you see in the LCD:
MIDI PROG= 0
> MIDI PROG= 0
PRESET= 1_
> PRESET= 60_
-Press the Value button and use the Encoder to change the number to 60.
-Press the param button twice, press the Value button and turn the Encoder 1
click.
-Press the Value button twice and use the Encoder to change the number to 151.
-Press the param button twice, press the Value button and turn the Encoder 1
click.
-Press the Value button twice and use the Encoder to change the number to 151.
MIDI PROG= 1
> MIDI PROG= 1
PRESET= 2_
> PRESET= 151_
-Exit MIDI mode by pressing the MIDI button once.
You may assign any preset # to any program # including a preset to a multiple of
program #'s. To test the reassigned numbers, use a MIDI device to recall the
presets. Your reassigned presets should be recalled.
program #'s. To test the reassigned numbers, use a MIDI device to recall the
presets. Your reassigned presets should be recalled.