Asrock 1core1333-2.66g User Manual

2 5

2 5

2 5

2 5

2 5

3.1

3.1

3.1

3.1

3.1

Introduction

Introduction

Introduction

Introduction

Introduction

This section explains how to use the BIOS SETUP UTILITY to configure your system.

The BIOS FWH chip on the motherboard stores the BIOS SETUP UTILITY. You may

run the BIOS SETUP UTILITY when you start up the computer. Please press <F2>

during the Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise,

POST will continue with its test routines.

If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by

pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system

chassis. You may also restart by turning the system off and then back on.

Because the BIOS software is constantly being updated, the

following BIOS setup screens and descriptions are for refer-

ence purpose only, and they may not exactly match what you

see on your screen.

3.1.1

3.1.1

3.1.1

3.1.1

3.1.1 BIOS Menu Bar

BIOS Menu Bar

BIOS Menu Bar

BIOS Menu Bar

BIOS Menu Bar

The top of the screen has a menu bar with the following selections:

To set up the system time/date information

To set up the advanced BIOS features

To set up the PCI features

To set up the default system device to locate and load the

Operating System

To set up the security features

To set up the chipset features

To exit the current screen or the BIOS SETUP UTILITY

Use <      > key or <      > key to choose among the selections on the menu bar,

and then press <Enter> to get into the sub screen.