Audioline al702 User Manual

Check that the telephone cord is undamaged and properly plugged in.

Disconnect any additional equipment that may be connected. If the problem is 

resolved, the fault is with the other equipment.

Test the equipment on a known working line. If the product works then the fault 

is with the line. Please inform your local telephone company.

The indicator on the base unit is flashing
-  New numbers have been received and stored in the memory.

No number shown in display when ringing
-  In order for this feature to function, you must subscribe to the Caller 

Identification service from your network provider.

-  If a message shows on the display, the call may be an international call (no 

data received), or from a private or blocked number.

-   If is MOBILE shown in the display, it is beacuse some operator send the call 

description, e.g. MOBILE as a name, then the number will not be shown 

during ringing. To show number in list during scrolling, press 

0

 when name 

is showed.

-  It may not be possible to receive CID information if the phone operates 

in a PBX system.

Warning signal while talking/Cannot connect
-  The batteries may be running low (recharge the hand unit).
-  The hand unit may be (nearly) out of range. Move closer to a base unit.

Telephone does not work
-  Check the adaptor, is it correctly connected to the base unit and to the 

mains power?

-  Check that the telephone cord has been correctly connected to the base unit 

and to the line socket.

-  Check the charge status of the handset batteries.
-  Try connecting another telephone, known to be in working order, to the line 

socket. If that phone works then it is likely that this equipment is faulty.

If the telephone still does not work, contact the place of purchase. Don’t forget 

the receipt or copy of the invoice.