3com database adapter module for networker nsr-ora v3.2 User Manual

System Administrator’s Guide

U42252-J-Z915-1-76

Installation and Configuration

 They will be used to configure your NetWorker Server.
 
 Please press ENTER to continue 

created resource id 0.20.3.237.51.225.160.62.77.0.0.4(1)
created resource id 0.21.3.237.51.225.160.62.77.0.0.4(1)
created resource id 0.22.3.237.51.225.160.62.77.0.0.4(1)
created resource id 0.23.3.237.51.225.160.62.77.0.0.4(1)
created resource id 0.24.3.237.51.225.160.62.77.0.0.4(1)
created resource id 0.25.3.237.51.225.160.62.77.0.0.4(1)
created resource id 0.26.3.237.51.225.160.62.77.0.0.4(1)
created resource id 0.27.3.237.51.225.160.62.77.0.0.4(1)
created resource id 0.28.3.237.51.225.160.62.77.0.0.4(1)
 
 Please NOTE: 
 -  The Group backup_ORA2_nero is disabled now. Please enable it and 
    choose the start time.
 
created resource id 0.29.3.237.51.225.160.62.77.0.0.4(1)
created resource id 0.30.3.237.51.225.160.62.77.0.0.4(1)
created resource id 0.31.3.237.51.225.160.62.77.0.0.4(1)

This section describes points to observe during installation and configuration of 
NSR-ORA in an OPS cluster (ORACLE Parallel Server cluster).

Installing NSR-ORA on all the OPS nodes as described in the 
section 

   For OPS systems the archiving monitor amon is used on every OPS 

node, so we recommend to use the same pathname for the redolog files 
on every node.

Special attention must be paid to the following factors when installing NSR-ORA 
in OPS systems:

●

NSR-ORA is configured from just one of the OPS nodes. The following 
commands have to be executed one after the other on that node

# configure_nsrora 
...
# configure_networker