3com 3c905c-tx-m, 3c905c-tx User Manual
Installing the NetWare Server Driver
43
The values <name1> and <name2> are unique names
assigned to each NIC by your system administrator. The
values <name1> and <name 2> must be different.
assigned to each NIC by your system administrator. The
values <name1> and <name 2> must be different.
The frame parameters <frametype1> and <frametype2>
can be one of the following:
can be one of the following:
■
Ethernet_802.2
■
Ethernet_802.3
■
Ethernet_II
■
Ethernet_SNAP
Make sure that the frametype for the server and the
workstation is the same. For example, if the server uses
Ethernet_802.2, the workstation must also use
Ethernet_802.2.
workstation is the same. For example, if the server uses
Ethernet_802.2, the workstation must also use
Ethernet_802.2.
The values <net1> and <net2> are unique numbers
assigned by the system administrator to each NIC. Make
sure that <net1> and <net2> are different numbers.
assigned by the system administrator to each NIC. Make
sure that <net1> and <net2> are different numbers.
See the appropriate Novell NetWare manuals for
further information.
further information.
Verifying the PCI Slot Number
To verify the PCI slot number in which a NIC is installed:
1 Reboot to a DOS prompt.
2 Insert EtherDisk diskette 3 in drive A.
3 Change to the A:\> prompt, and enter:
3c90xcfg.exe
The Selected NIC screen (Figure 7) of the 3Com Configuration
and Diagnostic Program for DOS appears.
and Diagnostic Program for DOS appears.
book Page 43 Monday, March 15, 1999 1:31 PM