3com 3CRWE850075A User Manual

28

For a basic configuration, use the Setup Wizard as described below. 

At any time, you can click Home to return to the Home page of the configuration 
interface. If you want to configure more advanced features, click Advanced Setup in 
the Home page.

In the Home page, click Setup Wizard. 

In the “1-2-3” Setup Wizard page, click Next to start basic configuration.

In the SSID page, enter the same Service Set ID as the other wireless devices in 
your network and click Next. (The SSID may be up to 32 alphanumeric characters 
and is case sensitive.) 

In the Channel page, select the channel options for the access point radios and 
click Next. The channel options are:
802.11g—You can select from these options:

n

802.11g Radio Channel—Set the operating radio channel number.

n

Auto Channel Select—When this mode is enabled, the access point selects a 

radio channel automatically.

802.11a—You can select from these options:

n

Turbo Mode—In some countries you can use Turbo Mode, allowing the access 

point to operate with a data rate of up to 108 Mbps. If Turbo Mode is not 

allowed in your country, this option is not available.

n

802.11a Radio Channel—Set the operating radio channel number.

n

Auto Channel Select—When this mode is enabled, the access point selects a 

radio channel automatically.

802.11b—Set the operating radio channel number.

In the TCP/IP Settings page, you can choose whether the access point obtains its 
IP address from a DHCP server or uses a static IP address. Configure the DHCP 
Client settings and click Next. 

In the Security page, make selections and click Next. 
For details on security settings, see “Security” on page 41.

Click Finish. 

Click OK to restart the access point.