3com corebuilder 10002211 User Manual

A

PPENDIX

 A: IP M

ULTICAST

 R

OUTING

The rate limit determines how fast multicast traffic can travel over the 
interface in kilobytes per second. Multicast traffic may not exceed this rate 
limit or the CoreBuilder system will drop packets in order to maintain the 
set rate. The default is set to 0, which implies no rate limit. In all other 
instances, the lower the rate limit, the more limited the traffic over the 
interface. 

To display a multicast interface:

1 From the top level of the Administration Console, enter:

2 Enter the slot of the switching module from which you want to display a 

multicast interface. 

Select IP stack(s) by slot (2,3,7,9-12|all) [12]:

Enter the index numbers of the interfaces you want to display.

Example multicast interface configuration for the slot:

system
ethernet
fddi
tokenring
bridge

➧

ip
ipx
appletalk
snmp
analyzer
script
logout

interface
route
arp

➧

multicast
udpHelper
routing
icmpRouterDiscovery
rip
ping
statistics

dvmrp
igmp

➧

interface
tunnel
routeDisplay
cacheDisplay

➧

display
enable
disable

Index  Local Address   Metric  Threshold  RateLimit   State

   1     158.101.112.32   1      1            0         queries

                           pkts   in:0    pkts out:0

                           port   3  peers     158.101.112.204  (3.6) (0x8e)

                                             158.101.112.202  (3.6) (0x8f)

                           port   3 groups     224.2.127.255    (3.6) (0x8e)

                                               224.2.143.24

                           port   4 groups     224.2.143.24

                                               224.2.127.225