3com WX4400 3CRWX440095A User Manual

The following scenario illustrates how to create a Mobility Domain named 
sunflower consisting of three members from a seed WX switch at 
192.168.253.21:

1 Make the current WX switch the Mobility Domain seed. Type the 

following command:

WX1200# set mobility-domain mode seed domain-name sunflower
success: change accepted.

2 On the seed, add the members of the Mobility Domain. Type the 

following commands:

WX1200# set mobility-domain member 192.168.253.11
success: change accepted.
WX1200# set mobility-domain member 192.168.111.112
success: change accepted.

3 For each member WX switch, configure the IP address used to reach the 

seed WX switch. Type the following commands:

WX1200# set mobility-domain member seed-ip 192.168.253.21

4 Display the Mobility Domain status. Type the following command:

WX1200# display mobility-domain
Mobility Domain name:  sunflower
Member

  State

 Status

---------------

  -------------

  --------------

192.168.111.112

  STATE_UP

 MEMBER

192.168.253.11

STATE_UP

 MEMBER

192.168.253.21

STATE_UP

SEED

5 To display the Mobility Domain configuration, type the following 

command:

WX1200# display mobility-domain config
This WX is the seed for domain sunflower.
192.168.253.11 is a member
192.168.111.112 is a member

6 To display the WX switches that are hosting VLANs for roaming, type the 

following command:

WX1200# display roaming vlan
VLAN WX

Affinity

---------------- --------------- --------
vlan-eng

192.168.12.7

  5

vlan-fin

192.168.15.5

  5

vlan-pm

 192.168.15.5

  5