3com WX2200 3CRWX220095A User Manual

Page of 728
IP Interfaces and Services Configuration Scenario
135
IP Interfaces and 
Services 
Configuration 
Scenario
This scenario configures IP interfaces, assigns one of the interfaces to be 
the system IP address, and configures a default route, DNS parameters, 
and time and date parameters. 
Configure IP interfaces on the mgmt and roaming VLANs, and verify the 
configuration changes. Type the following commands:
WX1200# set interface mgmt ip 10.10.10.10/24
success: change accepted.
WX1200# set interface roaming ip 10.20.10.10/24
success: change accepted.
WX1200# display interface
VLAN Name
Address
Mask
Enabled State
---- --------------- --------------- --------------- ------- -----
2 default
10.10.10.10
  255.255.255.0
YES
  Up
3 roaming
10.20.10.10
  255.255.255.0
YES
  Up
4094 web-aaa         10.10.10.1      255.255.255.0   YES     Up
The 10.10.10.1 interface in VLAN web-aaa is placed into the route table 
automatically by MSS, to support WebAAA.
Configure the IP interface on the roaming VLAN to be the system IP 
address and verify the configuration change. Type the following 
commands:
WX1200# set system ip-address 10.20.10.10
success: change accepted.
WX1200# display system
===============================================================================
 Product Name:
 WX1200
 System Name:
  WX1200
 System Countrycode: US
 System Location:
 System Contact:
System IP:
 10.02.10.10
System idle timeout:3600
 System MAC:
00:0B:0E:00:04:0C
===============================================================================
 Boot Time:
 2000-03-18 22:59:19
 Uptime:
  0 days 01:12:02
===============================================================================
Fan status:  fan1 OK fan2 OK fan3 OK
Temperature: temp1 ok  temp2 ok  temp3 ok
 PSU Status:  Lower Power Supply DC ok AC ok  Upper Power Supply missing
 Memory:
156.08/496.04 (31%)
 Total Power Over Ethernet : 105.6
===============================================================================