3com WX2200 3CRWX220095A User Manual

By default, RF load balancing is applied to client sessions for all SSIDs. To 
specifically exempt an SSID from load balancing, use the following command: 

set service-profile service-profile-name 
load-balancing-exempt {enable | disable}

Exempting a service profile from RF load balancing means that even if a 
MAP radio is attempting to steer clients away, it does not reduce or 
conceal the availability of the SSID named in the exempted service profile. 
Even if a radio is withholding probe responses to manage its load, the 
radio does respond to probes for an exempt SSID. Also, if a MAP radio is 
withholding probe responses, and a client probes for any SSID, and the 
radio has at least one exempt SSID, the radio responds to the probe, but 
the response reveals only the exempt SSID(s).

The display load-balancing group command displays a load balancing 
group member radios and current load for each radio. For example:

WX# display load-balancing group ap 2 radio 1

Radios in the same load-balancing group as: ap2/radio1

--------------------------------------------------
WX IP address Port Radio Overlap
------------------ ----- -------

For more information about the syntax, see the “MAP Commands” 
chapter of the 

.