3com WX2200 3CRWX220095A User Manual

C

HAPTER

 13: C

ONFIGURING

 U

SER

 E

NCRYPTION

auto-tune max-power: default

Port  6: AP model: mp-252, POE:  enable, bias: high, name: MAP11

  boot-download-enable: YES
  force-image-download: YES

Radio 1: type: 802.11g, mode:  enabled, channel: 6
tx pwr:  1, profile: rp2 
auto-tune max-power: default

Port 11: AP model: mp-252, POE: enable, bias: high, name: MP11

boot-download-enable: YES
force-image-download: YES

Radio 1: type: 802.11g, mode: enabled, channel: 6
tx pwr: 1, profile: rp2
auto-tune max-power: default
Radio 2: type: 802.11a, mode: enabled, channel: 36
tx pwr: 1, profile: rp2
auto-tune max-power: default

9 Save the configuration. Type the following command: 

WX1200# save config
success: configuration saved.

The following example shows how to configure MSS to provide PSK 
authentication and TKIP or 40-bit WEP encryption for MAC clients:

1 Create an authentication rule that sends all MAC users of SSID voice to 

the local database for authentication and authorization. Type the 
following command:

WX1200# set authentication mac ssid voice * local
success: configuration saved.

2 Configure a MAC user group named wpa-for-mac that assigns all MAC 

users in the group to VLAN blue. Type the following command:

WX1200# set mac-usergroup wpa-for-mac attr vlan-name blue
success: configuration saved.

3 Add MAC users to MAC user group wpa-for-mac. Type the following commands:

WX1200# set mac-user aa:bb:cc:dd:ee:ff group wpa-for-mac
success: configuration saved.
WX1200# set mac-user a1:b1:c1:d1:e1:f1 group wpa-for-mac
success: configuration saved.