3com WX2200 3CRWX220095A User Manual

C

HAPTER

 14: C

ONFIGURING

 RF A

UTO

-T

UNING

You can change the following RF Auto-Tuning settings:

„

Channel tuning

„

Power tuning

„

Minimum transport data rate

You can configure the 802.11a radio on a MAP to allow certain channels 
to be available or unavailable. To enable this feature, use the following 
command:

set radio-profile name auto-tune 11a-channel-range 
{lower-bands | all bands}

If you select 

, MSS selects a channel from the lower eight 

bands in the 802.11a range of channels: 36, 40, 44, 48, 52, 56, 60, or 
64. 

If you select 

, MSS selects a channel from the entire 802.11a 

range of channels: 36, 40, 44, 48, 52, 60, 64, 149, 153, 157, or 161.

RF Auto-Tuning for channels is enabled by default. To disable or reenable 
the feature for all radios in a radio profile, use the following command:

set radio-profile name auto-tune channel-config 
{enable | disable} [ignore-clients]

The ignore-clients

 option allows MSS to change the channel on a radio 

even if the radio has active client sessions. Without this option, MSS does 
not change the channel unless there are no active client sessions on the 
radio.

To disable channel tuning for radios in the rp2 radio profile, type the 
following command:

WX1200# set radio-profile rp2 auto-tune channel-config
disable
success: change accepted.