3com WX2200 3CRWX220095A User Manual
426
C
HAPTER
20: M
ANAGING
K
EYS
AND
C
ERTIFICATES
Displaying
Certificate and Key
Information
Certificate and Key
Information
To display information about certificates installed on a WX switch, use
the following commands:
the following commands:
display crypto ca-certificate {admin | eap | web}
display crypto certificate {admin | eap | web}
display crypto certificate {admin | eap | web}
For example, to display information about an administrative certificate,
type the following command:
type the following command:
You must paste the entire block, from the beginning
-----BEGIN CERTIFICATE REQUEST----- to the end
-----END CERTIFICATE REQUEST-----.
-----BEGIN CERTIFICATE REQUEST----- to the end
-----END CERTIFICATE REQUEST-----.
# display crypto certificate admin
Certificate:
Version: 3
Serial Number: 999 (0x3e7)
Subject: C=US, ST=CA, L=PLEAS, O=Mycorp, OU=SQA,
CN=BOBADMIN/emailAddress=BOBADMIN, unstructuredName=BOB
Signature Algorithm: md5WithRSAEncryption
Issuer: C=US, ST=CA, L=PLEAS, O=Mycorp, OU=SQA,
CN=BOBADMIN/emailAddress=BOBADMIN, unstructuredName=BOB
Validity:
Not Before: Oct 19 01:57:13 2004 GMT
Not After : Oct 19 01:57:13 2005 GMT
Certificate:
Version: 3
Serial Number: 999 (0x3e7)
Subject: C=US, ST=CA, L=PLEAS, O=Mycorp, OU=SQA,
CN=BOBADMIN/emailAddress=BOBADMIN, unstructuredName=BOB
Signature Algorithm: md5WithRSAEncryption
Issuer: C=US, ST=CA, L=PLEAS, O=Mycorp, OU=SQA,
CN=BOBADMIN/emailAddress=BOBADMIN, unstructuredName=BOB
Validity:
Not Before: Oct 19 01:57:13 2004 GMT
Not After : Oct 19 01:57:13 2005 GMT
The last two rows of the display indicate the period for which the
certificate is valid. Make sure the date and time set on the switch are
within the date and time range of the certificate.
certificate is valid. Make sure the date and time set on the switch are
within the date and time range of the certificate.