3com WXR100 3CRWXR10095A User Manual

To reset the update interval to the default value, use the following 
command:

The NTP client is disabled by default. To enable the NTP client, use the 
following command:

set ntp {enable | disable}

To display NTP information, use the following command:

Here is an example:

WX1200> display ntp
NTP client: enabled
Current update-interval: 20(secs)
Current time: Sun Feb 29 2004, 23:58:12
Timezone is set to 'PST', offset from UTC is -8:0 hours.
Summertime is enabled.
Last NTP update: Sun Feb 29 2004, 23:58:00
NTP Server

 Peer state

 Local State

---------------------------------------------------
192.168.1.5

SYSPEER

 SYNCED

The Timezone and Summertime fields are displayed only if you change 
the timezone or enable summertime.

(For more information about the fields in the output, see the