3com WXR100 3CRWXR10095A User Manual

C

HAPTER

 9: C

ONFIGURING

 N

ETWORK

 D

OMAINS

To specify 10.8.107.1 as an additional Network Domain seed for the WX 
switch to connect to if the 192.168.9.254 seed is unavailable, enter the 
following command:

WX1200# set network-domain mode member seed-ip 10.8.107.1 
affinity 2
success: change accepted.

To view the status of Network Domains configured on the WX switch, use 
the display network-domain command. The output of the command 
differs based on whether the WX switch is a member of a Network 
Domain or a Network Domain seed.

For example, a WXswitch that is a Network Domain member only, output 
such as the following is displayed:

WX4400# display network-domain

Member Network Domain name: California
Member              State             Mode 
---------------     -------------     ------ 
10.67.1.201

UP                  MEMBER 

10.67.1.200

 UP                  SEED 

On a WX switch that is a Network Domain seed, information is displayed 
about the Network Domain seeds with which the WX switch has a peer 
relationship, as well as the Network Domains of which the WX switch is a 
member. For example:

WX4400# display network-domain

Network Domain name: California
Peer                State
---------------     -------------
10.67.1.200

UP

Member              State             Mode 
---------------     -------------     ------
10.67.1.201

UP

 MEMBER

(For more information about this command and the fields in the output, 
see the 

.)