3com WXR100 3CRWXR10095A User Manual

When wireless bridging is enabled for a service profile, the MAPs with the 
applied service profile serve as bridge peers. When a Mesh AP associates 
with a Mesh Portal AP through this service profile, the Mesh Portal AP 
automatically configures the Mesh AP to operate in bridge mode.

The display service-profile command indicates whether bridging has 
been enabled for the service profile.

The display ap status terse command indicates which MAPs are Mesh 
APs and 

which are Mesh Portal MAPs. For example:

WX# display ap status terse
Total number of entries: 120
Operational: 1, Image Downloading: 0, Unknown: 119, Other: 0
Flags: o = operational, b = booting, d = image downloading
c = configuring, f = configuration failed
a = auto AP, m = mesh AP, p = mesh portal
i = insecure, e = encrypted, u = unencrypt
AP  Flag IP Address 

Model 

MAC Address 

Radio1 Radio2 Uptime

--- ---- ---------------  --------- ----------------- ------ ------ ------
7 

om-u MP-422 

00:0b:0e:00:ca:c0 D 1/1  D56/1  19h47m

The display ap status command displays the mesh services attributes for 
a MAP and the associated BSSID of the Mesh Portal. For example:

WX# display ap status
AP: 1, IP-addr: 10.8.255.10 (vlan 'corp'), AP model: mp-422,

manufacturer: 3Com, name: AP01

====================================================
State: operational (not encrypt)
CPU info: Atheros:MIPS32 speed=220000000 Hz version=AR5312, ram=16777216

s/n=111111 hw_rev=n/a

Uptime: 0 hours, 0 minutes, 11 seconds
Uplink BSSID: 00:0b:0e:17:bb:00

Radio 1 type: 802.11g, state: configure succeed [Enabled] (802.11b protect)

operational channel: 6 (Auto) operational power: 18
bssid1: 00:0b:0e:fd:fd:cc, ssid: public
RFID Reports: Inactive
Antenna Link Calibration: Enabled