3com WXR100 3CRWXR10095A User Manual

C

HAPTER

 14: C

ONFIGURING

 RF A

UTO

-T

UNING

The default power tuning interval is 600 seconds. You can change the 
interval to a value from 1 to 65535 seconds. To change the power tuning 
interval, use the following command: 

set radio-profile name auto-tune power-interval seconds

To set the power tuning interval for radios in radio profile rp2 to 240 
seconds, type the following command:

WX1200# set radio-profile rp2 auto-tune power-interval 240
success: change accepted.

By default, the maximum power level that RF Auto-Tuning can set on a 
radio is the same as the maximum power level allowed for the country of 
operation. To change the maximum power level that RF Auto-Tuning can 
assign, use the following command:

set ap apnumber radio {1 | 2} auto-tune max-power power-level

The power-level can be a value from 1 to 20.

To set the maximum power that RF Auto-Tuning can set on radio 1 on 
the MAP on port 6 to 12 dBm, type the following command. 

WX1200# set ap 6 radio 1 auto-tune max-power 12
success: change accepted.

You can convert dynamically assigned channels and power settings into 
statically configured settings, by locking them down. When you lock 
down channel or power settings, MSS converts the latest values set by RF 
Auto-Tuning into static settings.

You can lock down channel or power settings on a radio-profile basis. 
MSS implements the lock down by changing the set {ap | dap} radio 
channel or set {ap | dap} radio tx-power command for each radio 
managed by the radio profile

.

To lock down channel or power settings, use the following commands:

set radio-profile name auto-tune channel-lockdown
set radio-profile name auto-tune power-lockdown