3com WXR100 3CRWXR10095A User Manual
342
C
HAPTER
16: C
ONFIGURING
Q
UALITY
OF
S
ERVICE
Changing QoS
Settings
Settings
You can change the settings of the following QoS options:
QoS mode
U-APSD support
CAC state and maximum number of sessions
Broadcast control
Static CoS state and CoS value
DSCP-CoS mappings
Using client DSCP value to classify QoS level of IP packets
The QoS mode is configurable on a radio-profile basis. CAC and static
CoS are configurable on a service-profile basis. DSCP-CoS mapping is
configurable on a global switch basis.
CoS are configurable on a service-profile basis. DSCP-CoS mapping is
configurable on a global switch basis.
Changing the QoS
Mode
The default QoS mode is WMM. To change the QoS mode on a radio
profile, use the following command:
profile, use the following command:
set radio-profile name qos-mode {svp | wmm}
For example, the following command changes the QoS mode for radio
profile rp1 to SVP:
profile rp1 to SVP:
WX1200# set radio-profile rp1 qos-mode svp
success: change accepted.
success: change accepted.
SVP configuration requires ACLs to set CoS, in addition to the SVP QoS
mode. (For information, see “Enabling SVP Optimization for SpectraLink
Phones” on page 404.)
mode. (For information, see “Enabling SVP Optimization for SpectraLink
Phones” on page 404.)
Enabling U-APSD
Support
U-APSD support is disabled by default. To enable it on a radio profile, use
the following command:
the following command:
set radio-profile name wmm-powersave {enable | disable}
For example, the following command enables U-APSD on radio profile
rp1:
rp1:
WX# set radio-profile rp1 wmm-powersave enable
success: change accepted.
success: change accepted.