3com WXR100 3CRWXR10095A User Manual

To enable or disable uplink fast convergence, use the following 
command:

set spantree uplinkfast {enable | disable}

To display uplink fast convergence information, use the following 
command:

display spantree uplinkfast [vlan vlan-id]

The following command displays uplink fast convergence information for 
all VLANs:

WX1200# display spantree uplinkfast
VLAN

 port

 list

------------------------------------------------------------
1

  1(fwd),2,3

In this example, ports 1, 2, and 3 provide redundant links to the network 
core. Port 1 is forwarding traffic. The remaining ports block traffic to 
prevent a loop.

You can use CLI commands to display the following STP information:

„

Bridge STP settings and individual port information

„

Blocked ports

„

Statistics

„

Port fast, backbone fast, and uplink fast convergence information

To display STP bridge and port information, use the following command:

display spantree [port port-list | vlan vlan-id] [active]

By default, STP information for all ports and all VLANs is displayed. To 
display STP information for specific ports or a specific VLAN only, enter a 
port list or a VLAN name or number. For each VLAN, only the ports 
contained in the VLAN are listed in the command output.