3com WXR100 3CRWXR10095A User Manual

You can also view a specific security ACL. For example, to view acl-2, type 
the following command:

WX1200# display security acl info acl-2
ACL information for acl-2
set security acl ip acl-2 (hits #1 0)
----------------------------------------------------
 1. permit L4 Protocol 115 source IP 192.168.1.11 0.0.0.0 destination IP 
192.168.1.15 0.0.0.0 precedence 0 tos 0 enable-hits

Once you map an ACL, you can view the number of packets it has 
filtered, if you included the keyword hits. (For information on setting hits, 
see “Setting a Source IP ACL” on page 380.) Type the following 
command:

WX1200# display security acl hits
ACL hit-counters
Index Counter

  ACL-name

----- -------------------- --------

 1

0 acl-2

 2

0 acl-999

5

916 acl-123

To sample the number of hits the security ACLs generate, you must 
specify the number of seconds between samples. For example, to sample 
the hits generated every 180 seconds, type the following commands:

WX1200# set security acl hit-sample-rate 180
WX1200# display security acl hits
ACL hit-counters
Index Counter 

ACL-name

----- -------------------- --------

1

31986 acl-red

2

0 acl-green

To display the security ACL hits on MAP 7, type the following command:

WX# display ap acl hits 7
ACL hit-counters for AP 7
Index Counter              ACL-name
----- -------------------- --------
    1

0 acl_2

    2

0 acl_175

3

916 acl_123